CASTLE EURO MiniProx END STATION CONTROL PANEL.

10 Fully programmable Multi-Zone for the must professional installations, the Castle series provides unsurpassed flexibility in all areas of system design and performance.

Castle Euro Mini is suited to most domestic and light commercial applications. Ten fully programmable zones with three dedicated for Personal Attack Tamper and Push to Set allows the system to be designed to meet your requirements.

Features

• 10 Fully programmable zones with 3 dedicated to PA, Tamper and Push To Set.
• 4 level settings allow the system to be part set in various combinations.
• Up to 4 attractive LCD 32 character keypads can be fitted with the system allowing the main panel to be concealed in a cupboard or loft area.
• A 500 event memory log stores information not only about alarm activations but also which user sets and unsets the system.
• The Castle range can be connected to communication equipment which can be linked to an Alarm Receiving Centre or SMS text messaging optional com module.The eight fully programmable zones with four level settings allow the system to be tailored to meet your specific needs.

This gives you the flexibility to protect various combinations of rooms/areas whilst leaving others free to enable movement around the property e.g. a part set program protecting all downstairs areas whilst leaving the upstairs free during the night.

Castle Euro Mini Remote Keypad + Proximity Reader.

Surface-mount Keypad incorporating Proximity reader can be placed around your property in an area of convenience so that you can operate your alarm system whilst the main panel can be hidden away, limiting the threat of sabotage by an intruder. The LCD keypad (large display) featuring touchtone keys, backlit 32 character display which will allow you to enter user names and zone descriptions into the panel rather than numbers and duress buttons for Panic, Fire and Medical. You can have up to 3 additional Remote Keypads to the system.

Property Insurance (Bells only system).

The 500 event time & date stamped log memory stores information such as the zone area in which an intrusion takes place. This memory log conforms to the guideline set out by the Association of British Insurers (ABI).

ONE DOOR CONTACT on FINAL EXIT.

Timed entry exit entrance route (Front door to hall). Surface magnetic contact, complete with tamper to comply with BS4737: Part 3: Section 3.3.

TWO PASSIVE INFRA-RED DETECTORS.

ME Q Blue Professional wide angle / long range Projected Passive infra-red Detector 4 plan 34 zone sealed optics and adjustable mounting height covering area of 15 metres surface or corner mounted optimum height 1.8m to 2.5m. Automatic temperature compensation and Thermal drift, Analogue tripe pulse count, LED walk test and High RFI immunity for internal trap protection. The Passive Infrared Receiver works by constantly monitoring the Infrared energy levels around a room and recognising a change caused by the entry of an intruder.

Approved to BS EN 55022 Class B and BS EN 50130-4 : 1996.

AUDIBLE WARNING,

INTERNAL SOUNDER.

Internal sounder for extra audibility within main control panel. An internal sounder for burglar alarm panels, also to allow keypad and entry exit sounds to be heard if it is difficult to hear the alarm control panel's audio when the keypad is pressed or the entry exit sequence is triggered.

MASTER BELLBOX.

Deltabell Sounder and Strobe Unit Grade 3 Foam resistant external Polycarbonate 3mm bell box in white, high power 109db electronic sounder with the new digital fail-safe self cut-off timer module to limit sounder to 20 minutes self activating self powered sounder with blue visual xenon strobes light and twin flashing alternating LED’s, Lid & Wall Tamper to be mounted at the front elevation of building British Standard 4737. EN 50131 Grade 3.

ANTI-TAMPER.

All alarm circuit wiring, sensors, magnetic switches and sounders will be 24hr anti-tamper proof while system is set or un-set, if tampered with, this will activate alarm system.

MAINS SUPPLY,

Un-switch 13amp fused spur unit to supply the alarm end station control panel. To be fitted by our qualified electrician to IEE regulations.

ALL ALARM CIRCUIT CABLES.

All alarm circuit cables will be hidden wherever possible. The above installation will be carried out to British Standard 4737 and will carry a one year guarantee from date of installation.

All installed for the Sum of: £439.00

ALL ALARM EQUIPMENT INSTALLED

All manufactures of the above equipment installed are register to BISA, (The British Security Industry Association), CAA, CE, EASEA, SIA, SPIA, and certificate registered firms British Standard 5750 / ISO9002 and manufactured to British Standard 4737.

We offer you the lowest price on all Intruder Alarm Systems, we can offer a further 10% discount for cash payments, if you should receive a written quotation for the same system at a lower price, we will do our best to match that price, plus offer an additional 2.5% discount.

You can contact us directly by clicking here or Call us on: 01689 836929 where we will be happy to compare our quotation / specification.